Qualified staff for residential garage door
These tips will help you lubricate garage door parts properly and repair garage door damages carefully.
Readjust the tracks if the bottom brackets rub against them
This is a fairly common issue which can cause a sharp scraping noise. The best thing which you can do according to our experts in Jensen Beach is to widen the track spacing just a little bit. Just make sure that the spacing is not wider than what the manufacturer recommends.
Check the rollers if the door stops a few inches from the bottom
One of the main causes of this problem is the bending of one or more roller stems. Inspect each roller carefully and pay special attention to the position of the stems. If damage is present then replacement is required and it has to be made as soon as possible.
Perform a test for worn-out weather seals
For this, you need to get inside the garage during the day, close the garage door and turn off the lights. If you see ambient light penetrating between the frame and the sides of the panels, then the seals have to be replaced with new ones. This should be done without delay so the energy efficiency of the garage is maintain